HPE Aruba Networking AP and gateway accessories

USB Accessories

  • USB LTE Modem
    Add high speed primary or backup WLAN uplinks to your APs and gateways with the Aruba USB LTE Modem.
  • Bluetooth and Zigbee Expansion Radio
    Extend 802.15.4 support where needed. Rather than replacing older APs, the Aruba Zigbee USB dongles plug in to meet the IoT requirements for food safety, cooking and refrigeration, heat, lighting, leak, load controls, door locking, and other sensors.
USB LTE Modem

Tri-band indoor AP antennas with 6GHz support

Aruba indoor AP antenna AP-ANT-311

Articulating direct-mount tri-band omni-directional dipole antenna (RP-SMA) for indoor use
The AP-ANT-311 antenna is a high-performance, tri-band, omni-directional, indoor antenna ideally designed for multifunction access points that require an omnidirectional coverage pattern for WLAN service delivery or air monitoring on the 2.4GHz, 5GHz and/or 6GHz bands.
The AP-ANT-311 has an articulating mount, providing flexibility in deployment and direct connection to Aruba access points, allowing the antennas to be oriented vertically regardless of the orientation and mount plane of the AP.

Learn More

Aruba indoor AP antenna AP-ANT-312

Articulating low-profile direct-mount tri-band omni-directional dipole antenna (RP-SMA) for indoor use
The AP-ANT-312 antenna is a low-profile, tri-band, omni-directional, indoor antenna ideally designed for multifunction access points that require an omnidirectional coverage pattern for WLAN service delivery or air monitoring on the 2.4GHz, 5GHz and/or 6GHz bands.
The AP-ANT-312 has an articulating mount, providing flexibility in deployment and direct connection to Aruba access points, allowing the antennas to be oriented vertically regardless of the orientation and mount plane of the AP, in deployments where available space is limited and AP-ANT-311 cannot be used.

Learn More

Aruba indoor AP antenna AP-ANT-313

Tri-band omni-directional high-performance dipole antenna (RP-SMA, cabled) for indoor and outdoor use
The AP-ANT-313 antenna is a high-performance, tri-band, omni-directional, indoor / outdoor dipole antenna ideally designed for multifunction access points that require an omnidirectional coverage pattern for WLAN service delivery or air monitoring on the 2.4GHz, 5GHz and/or 6GHz bands.
The AP-ANT-319 ships with all hardware for pole or (suspended) ceiling mounted deployments.

Learn More

Aruba indoor AP antenna AP-ANT-320

Dual-polarized tri-band 2-element low-profile downtilt-omni antenna (RP-SMA, cabled) for indoor use
The AP-ANT-320 antenna is a tri-band, 2-element, dual-polarized low-profile downtilt omnidirectional antenna, intended for discrete ceiling mounted applications, providing coverage for Wi-Fi access in 2.4GHz, 5GHz and/or 6GHz concurrently.
The AP-ANT-320 mounts directly to the suspended ceiling tile.

Learn More

Aruba indoor AP antenna AP-ANT-325

Dual-polarized cabled tri-band 2-element medium gain directional panel antenna (RP-SMA) for indoor and outdoor use
The AP-ANT-325 antenna is a tri-band, 2-element, dual-polarized panel antenna with nominal 90° H x 90° V beamwidths and 5dBi peak gain. This antenna is well suited for indoor and outdoor sector coverage for Wi-Fi access in 2.4GHz, 5GHz and/or 6GHz concurrently.
The AP-ANT-325 can be mounted directly to a wall (or ceiling) using the supplied screws and anchors, or if more flexibility is needed it can be combined with the optional AP-ANT-MNT-U articulating wall/pole mount.

Learn More

Aruba indoor AP antenna AP-ANT-328

Dual-polarized cabled tri-band 2-element high gain directional panel antenna (RP-SMA) for indoor and outdoor use
The AP-ANT-328 antenna is a tri-band, 2-element, dual-polarized panel antenna with nominal 60° H x 60° V beamwidths and 8dBi peak gain. This antenna is well suited for indoor and outdoor directional coverage for Wi-Fi access in 2.4GHz, 5GHz and/or 6GHz concurrently.
The AP-ANT-328 can be mounted directly to a wall (or ceiling) using the supplied screws and anchors, or if more flexibility is needed it can be combined with the optional AP-ANT-MNT-U articulating wall/pole mount.

Learn More

Aruba indoor AP antenna AP-ANT-340

Dual-polarized tri-band 4-element low-profile down-tilt-omni antenna (RP-SMA, cabled) for indoor use
The AP-ANT-340 antenna is a tri-band, 4-element, dual-polarized low-profile down-tilt omnidirectional antenna, intended for discrete ceiling mounted applications, providing coverage for Wi-Fi access in 2.4GHz, 5GHz and/or 6GHz concurrently.
The AP-ANT-340 mounts directly to the suspended ceiling tile.

Learn More

Aruba indoor AP antenna AP-ANT-345

Dual-polarized cabled tri-band 4-element medium gain directional panel antenna (RP-SMA) for indoor and outdoor use
The AP-ANT-345 antenna is a tri-band, 4-element, dual-polarized panel antenna with nominal 90° H x 90° V beamwidths and 5dBi peak gain. This antenna is well suited for indoor and outdoor sector coverage for Wi-Fi access in 2.4GHz, 5GHz and/or 6GHz concurrently.
The AP-ANT-345 can be mounted directly to a wall (or ceiling) using the supplied screws and anchors, or if more flexibility is needed it can be combined with the optional AP-ANT-MNT-U articulating wall/pole mount.

Learn More

Aruba indoor AP antenna AP-ANT-348

Dual-polarized cabled tri-band 4-element high gain directional panel antenna (RP-SMA) for indoor and outdoor use
The AP-ANT-348 antenna is a tri-band, 4-element, dual-polarized panel antenna with nominal 60° H x 60° V beamwidths and 8dBi peak gain. This antenna is well suited for indoor and outdoor directional coverage for Wi-Fi access in 2.4GHz, 5GHz and/or 6GHz concurrently.
The AP-ANT-348 can be mounted directly to a wall (or ceiling) using the supplied screws and anchors, or if more flexibility is needed it can be combined with the optional AP-ANT-MNT-U articulating wall/pole mount.

Learn More

Dual-band indoor AP antennas

Aruba indoor AP antenna AP-ANT-1W

2.4-2.5GHz/5GHz, 5.0dBi tri-band, omnidirectional antenna
With an articulating mount this antenna provides flexibility in deployment and direct connection to HPE Aruba Networking access points with an onboard RP-SMA connector. These antennas are the preferred choice for multi-purpose service deployment or wireless intrusion prevention (WIP).

Aruba indoor AP antenna AP-ANT-13B

Indoor, downtilt omni, dual-band
AP-ANT-13B antenna offers characteristics that are only normally seen in much larger antennas, offering ”no compromise” coverage ideally suited for high-density AP deployments.

Aruba indoor AP antenna AP-ANT-16

Indoor, triple element downtilt omni, dual-band
AP-ANT-16 is a dual-band 3-element omni-directional antenna for use in 802.11n MIMO applications.

Aruba indoor/outdoor AP antenna AP-ANT-19

Indoor/outdoor, dual-band omnidirectional
This antenna offers full-band coverage for Wi-Fi and includes all hardware required to mount indoors or outdoors. It provides full-band coverage and omnidirectional coverage over both bands.

Aruba indoor AP antenna AP-ANT-20W

2.4- and 5-GHz dual-band omnidirectional
The compact AP-ANT-20W is ideal for multifunction APs that require omnidirectional coverage for the 2.4-GHz and 5-GHz bands. AP-ANT-20W has an articulating mount for deployment flexibility.

Aruba indoor MIMO AP antenna AP-ANT-22

Aruba indoor MIMO antenna
AP-ANT-22 is a kit of two small downtilt onmi antennas, intended for use in industrial and stadium applications.

Aruba indoor AP antenna AP-ANT-25A

2.4- and 5-GHz dual-polarized antenna
AP-ANT-25A is a dual polarized antenna with nominal 90° H x 90° V beamwidths. This antenna is well suited for 2.4 and 5 GHz sector coverage for access.

Aruba indoor/outdoor AP antenna AP-ANT-28A

2.4- and 5-GHz dual-polarized antenna
AP-ANT-28A is a dual-polarized antenna with 60° H x 60° V beamwidths. This antenna is well suited for 2.4-GHz and 5-GHz sector coverage for Wi-Fi access.

Aruba indoor AP antenna AP-ANT-40

2.4GHz and 5GHz dual-band downtilt omnidirectional ceiling mount antenna
AP-ANT-40 is a dual band 4-element omni-directional antenna for use in Wi-Fi MIMO applications.
The radiation patterns are uniform and symmetrical, providing high level signal density into defined coverage zones, and optimum coverage conditions for MIMO performance.

Aruba indoor/outdoor 4x4 MIMO AP antenna AP-ANT-45

2.4- and 5-GHz multi-polarized antenna
AP-ANT-45 is a multi-polarized antenna with nominal 90° H x 90° V beamwidths. This antenna is well suited for 2.4 and 5 GHz sector coverage for access.

Aruba indoor/outdoor 4x4 MIMO AP antenna AP-ANT-48

2.4-GHz and 5-GHz sector Wi-Fi coverage
AP-ANT-48 is a multi-polarized antenna with nominal 60° H x 60° V beamwidths. This antenna is well suited for 2.4 and 5 GHz sector coverage for access.

Dual-band outdoor antennas

Aruba outdoor MIMO antenna ANT-4x4-D707

2.4-GHz and 5-GHz sector Wi-Fi coverage
ANT-4x4-D707 is a multipolarized antenna with 60° H x 60 ° H V beamwidths. This antenna is suited for 2.4 and 5GHz sector coverage for access.

Aruba outdoor MIMO antenna ANT-4x4-5314

Outdoor multipolarized 4.9-6.0 GHz
ANT-4x4-5314 is a multipolarized antenna with 30° H x 30° V beamwidths. This antenna is well suited for coverage along a street, for spot coverage, or for covering a seating section in stadiums and other large public venues.

Aruba outdoor antenna ANT-3x3-5712

Outdoor multipolarized 5 GHz
ANT-3x3-5712 is a multipolarized antenna with 70° horizontal and 25° vertical beamwidths. This antenna is ideally suited for 5-GHz point-to-multipoint mesh connections.

Aruba outdoor antenna kit ANT-2X2-2005

Two outdoor 2.4-2.5 GHz omnidirectional antennas
ANT-2x2-2005 is a kit of two omnidirectional antennas for use in 802.11n MIMO mesh link and client access applications. The kit contains two differently polarized antennas to be used as a 2x2 MIMO pair, and provides coverage in the 2.4-2.5 GHz frequency band.

Aruba outdoor MIMO antenna kit ANT-2X2-2314

Outdoor MIMO antenna ANT-2x2-2314
ANT-2x2-2314 is a dual-polarized antenna with 30° H x 30° V beamwidths. This antenna is well suited for coverage along a street, spot coverage, or for covering a seating section in stadiums and other large public venues.

Aruba outdoor antenna kit ANT-2x2-5005

Outdoor 4.9-5.875 GHz Vpol and Hpol antennas
ANT-2x2-5005 is a kit of two omnidirectional antennas for use in MIMO mesh link and client access applications. The kit contains 2 differently polarized antennas to be used as a 2x2 MIMO pair, and provides coverage in the 4.9 – 5.875 GHz frequency band.

Aruba outdoor antenna kit ANT-2x2-5010

Outdoor 4.9-5.875 GHz Vpol and Hpol antennas
ANT-2x2-5010 is a kit of two omnidirectional antennas for use in MIMO mesh link and client access applications. The kit contains 2 differently polarized antennas to be used as a 2x2 MIMO pair, and provides coverage in the 4.9 – 5.875 GHz frequency band.

Aruba outdoor MIMO antenna kit ANT-2x2-5314

Outdoor MIMO antenna ANT-2x2-5314
ANT-2x2-5314 is a dual-polarized antenna with 30° H x 30° V beamwidths. This antenna is well suited for coverage along a street, for spot coverage, or for covering a seating section in stadiums and other large public venues. It is also ideal for point-to-point connections. The narrower beamwidth reduces the zone where interference may be received.

Aruba outdoor antenna ANT-2x2-2714

Outdoor 2.4-2.483 GHz 70 degree antenna
ANT-2x2-2714 is a 2-element 70 degree sector antenna for use in MIMO mesh link applications. The antenna integrates 2 differently polarized elements, and provides coverage of 2.400 – 2.483 GHz frequency band in a single antenna radome.

Gateway LTE antennas

Aruba 9004 LTE-ANTI indoor antenna

The 9004-LTE-ANTI is a high-performance omni-directional indoor dipole antenna. It is ideally designed for use with Aruba 9004-LTE gateways. The 9004-LTE-ANTI plugs into onboard RP-SMA connectors on 9004-LTE gateways as main and diversity antennas. The antenna can be used as a GPS antenna and can also be extended using an indoor antenna extender kit.

Aruba 9004 LTE-ANTO outdoor antenna

The 9004-LTE-ANTO is a high-performance omnidirectional outdoor dipole antenna. It is ideally designed for use with Aruba 9004-LTE gateways. The 90xx-LTE-ANTO is installed outdoors and is connected to a 9004-LTE via the outdoor extender cable. The antenna can also be used as a GPS antenna.

Ready to get started?