Aruba 370 Series outdoor Wi-Fi 5 access points
Weatherproof and temperature-hardened, the Aruba 370 Series 802.11ac Wave 2 access points deliver multi-gigabit Wi-Fi to outdoor and environmentally challenging locations.
Industrial design for harsh indoor and outdoor environments
The 370 Series APs deliver multi-gigabit Wi-Fi to outdoor and environmentally challenging locations.
High-performance for outdoor environments
With a maximum aggregate data rate of over 2 Gbps, the Wi-Fi 370 Series comes with MU-MIMO, four spatial streams, and optional 160MHz to add performance and capacity.
Dynamic Segmentation
Automatically enforces real-time, device-level access policies on Aruba wired and wireless networks for improved network security and simplicity.
Intelligent app visibility and control
AppRF technology leverages deep-packet inspection to classify and block, prioritize, or limit bandwidth for 1,000s of enterprise apps or groups of apps.
Hardened, industrial design
Extends the temperature range capabilities of indoor access points for environments that lack heating and cooling. The 370 Series APs also provide sealed connector interfaces to protect against dust and moisture.
Zero-touch provisioning
Access points can be factory-shipped and zero-touch provisioned through Aruba Central or AirWave using a cloud-based service to reduce deployment time, centralize configuration, and manage inventory.
Best in-class RF management
Integrated AirMatch technology manages the 2.4GHz and 5GHz radio bands and actively optimizes the RF environment, including channel width, channel selection, and transmit power.
Details and specifications for the Aruba 370 Series APs
Specifications
Unique Benefits - Dual Radio 802.11ac access point with Multi-User MIMO
- Supports up to 1,733 Mbps in the 5 GHz band (with 4SS/VHT80 or 2SS/VHT160 clients) and up to 300 Mbps in the 2.4 GHz band (with 2SS/HT40 clients)
- Built-in Bluetooth Low-Energy (BLE) radio
- Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time
- Advanced Cellular Coexistence (ACC)
- Minimizes interference from 3G/4G cellular networks, distributed antenna systems, and commercial small cell/femtocell equipment
- Industrial design for harsh indoor and outdoor environments
- Sealed connector interfaces to lock out dust and moisture
- Quality of service for unified communication apps
- Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat, and desktop sharing
- Best-in-class RF management
- Integrated AirMatch technology manages the 2.4-GHz and 5-GHz radio bands and actively optimizes the RF environment including channel width, channel selection and transmit power.
- Spectrum analysis
- Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.
- Wireless mesh
- Wireless mesh connections are convenient where Ethernet drops are not available.
- Intelligent app visibility and control
- AppRF technology leverages deep packet inspection to classify and block, prioritize, or limit bandwidth for 1,000's of enterprise apps or groups of apps.
- Aruba Secure Core
- Device assurance: Use of Trusted Platform Module (TPM) for secure storage of credentials and keys as well as secure boot.
- Integrated wireless intrusion protection offers threat protection and mitigation and eliminates the need for separate RF sensors and security appliances.
- IP reputation and security services identify, classify, and block malicious files, URLs, and IPs, providing comprehensive protection against advanced online threats.
- Encrypted IPsec VPN tunnels securely connect remote users to corporate network resources.
Choose Your Operating Mode - As unified APs, the Aruba 370 Series can be deployed with or without a controller and can be readily switched to accommodate changing network needs.
- Controller mode: When managed by Aruba Mobility Controllers, Aruba 370 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding, or
- Controllerless (Instant) mode: In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – Instant Network.
- Other functional modes include:
- Remote AP (RAP) mode for branch deployments
- Air monitor (AM) for wireless IDS, rogue detection, and containment
- Spectrum analyzer, dedicated or hybrid, for identifying sources of RF interference
- Secure enterprise mesh
- Hybrid AP serves Wi-Fi clients and provides wireless intrusion protection and spectrum analysis
- For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Unified APs are factory-shipped to any site and configure themselves when powered up.
Specifications - AP-374
- 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
- Four Nf connectors for external antenna operation
- 2.4 GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios
- Two Nf connectors for external antenna operation at 2.4 GHz
- 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
- AP-375
- 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
- Internal Omni Antennas 4.6 dBi
- 2.4 GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios
- Internal Omni Antennas 4.0 dBi
- 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
- AP-377
- 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
- Internal 80°H x 80°V Directional Antennas 6.3 dBi
- 2.4 GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios
- Internal 80°H x 80°V Directional Antennas 6.4 dBi
- 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
Wi-Fi Radio Specifications - AP type: Outdoor hardened, dual radio, 5 GHz 802.11ac 4x4 MIMO and 2.4 GHz 802.11n 2x2 MIMO
- Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
- 5 GHz:
- Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously
- Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4x4 VHT80 or 2x2 VHT160 client devices
- 2.4 GHz:
- Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2x2 HT40 client devices
- Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
- Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
- Available channels: Dependent on configured regulatory domain.
- Dynamic frequency selection (DFS) maximizes the use of available RF spectrum.
- Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
- Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- Transmit power: Configurable in increments of 0.5 dBm
- Maximum (conducted) transmit power (limited by local regulatory requirements):
- 2.4 GHz band: +22 dBm per chain, +25dBm aggregate (2x2)
- 5 GHz band: +22 dBm per chain, +28dBm aggregate (4x4)
- Note: conducted transmit power levels exclude antenna gain.
- Maximum EIRP (limited by local regulatory requirements):
- 2.4 GHz band:
- 374: 25 + Antenna Gain
- 375: 29 dBm EIRP
- 377: 31.4 dBm EIRP
- 5 GHz band:
- 374: 28 + Antenna Gain + TxBF Gain
- 375: 35.6 dBm EIRP
- 377: 36 dBm EIRP
- 2.4 GHz band:
- Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.
- Maximum ratio combining (MRC) for improved receiver performance
- Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
- Short guard interval for 20-MHz, 40-MHz, 80-MHz and 160-MHz channels
- Space-time block coding (STBC) for increased range and improved reception
- Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
- Transmit beam-forming (TxBF) for increased signal reliability and range
- Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)
- 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS31)
- 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11ac very high throughput (VHT) support: VHT 20/40/80/160
- 802.11n/ac packet aggregation: A-MPDU, A-MSDU
- Dual Radio 802.11ac access point with Multi-User MIMO
Power - Worst-case power consumption from the AP: 23W
- Power sources sold separately
- Power over Ethernet (PoE+): 802.3at-compliant
- AC Power: 100-240 Volt 50/60Hz AC
Other Interfaces - One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- One 1000BASE-X SFP Port
- Bluetooth Low Energy (BLE) radio
- Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity
- Visual indicator (multi-color LED): For system and radio status
- Reset button: Factory reset (during device power up)
- Micro USB console interface
- Kensington security slot
Mounting - Optional mounting kits:
- AP-OUT-MNT-V1A: Outdoor Pole/Wall Long Mount Kit
- AP-270-MNT-V2: Outdoor Pole/Wall Short Mount Kit
- AP-270-MNT-H1: Outdoor AP Hanging or Tilt Install Mount Kit
- AP-270-MNT-H2: Outdoor Flush Wall or Ceiling Mount
- AP-270-MNT-H3: Outdoor AP Hanging or Dual-Tilt Install Mount Kit
- * Note: The AP-270-MNT-V2 is not compatible with Fiber/SFP gland kit
Mechanical - AP-374
- Dimensions/weight with aesthetic cover (excluding mount):
- 23 cm (W) x 24 cm (D) x 19 cm (H)
- 9.0" (W) x 9.4" (D) x 7.5" (H)
- 2.7 kg / 6 lbs
- Dimensions/weight without aesthetic cover (excluding mount):
- 23 cm (W) x 24 cm (D) x 14 cm (H)
- 9.0" (W) x 9.4" (D) x 5.5" (H)
- 2.4 kg / 5.3 lbs
- Dimensions/weight with aesthetic cover (excluding mount):
- AP-375
- Dimensions/weight (excluding mount):
- 23 cm (W) x 24 cm (D) x 27 cm (H)
- 9.0" (W) x 9.4" (D) x 10.6" (H)
- 2.4 kg / 5.3 lbs
- Dimensions/weight (excluding mount):
- AP-377
- Dimensions/weight (excluding mount):
- 23 cm (W) x 22 cm (D) x 13 cm (H)
- 9.0" (W) x 8.7" (D) x 5.1" (H)
- 2.1 kg / 4.6 lbs
- Dimensions/weight (excluding mount):
Environmental - Operating:
- Temperature: -40° C to +65° C (-40° F to +149° F)
- Humidity: 5% to 95% non-condensing
- Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)
- Operating altitude: 3,000 m
- Water and dust
- IP66/67
- Salt tolerance
- Tested to ASTM B117-07A Salt Spray 200hrs
- Wind survival: Up to 165 Mph
- Shock and vibration ETSI 300-19-2-4
Regulatory - FCC/ISED
- CE Marked
- RED Directive 2014/53/EU
- EMC Directive 2014/30/EU
- Low Voltage Directive 2014/35/EU
- UL/IEC/EN 60950
- EN 60601-1-1, EN60601-1-2
- Railway Certs:
- EN 50155:2017 – Railway Applications
- EN 50121-1:2017 – Railway EMC
- EN 50121-3-2 – Railway EMC
- EN 50121-4:2016 – Railway Immunity
- IEC 61373 ed2:2008 – Railway Shock and Vibration
- For more country-specific regulatory information and approvals, please see your Aruba representative.
Regulatory Model Numbers - AP-374: APEX0374
- AP-375: APEX0375
- AP-377: APEX0377
Certifications - CB Scheme Safety, cTUVus
- UL2043 plenum rating
- Wi-Fi Alliance certified 802.11a/b/g/n
- Wi-Fi CERTIFIED™ ac (with wave 2 features)
- EN50155 Railway
Warranty Minimum Software Versions - ArubaOS & Aruba InstantOS 8.3.0.0
- ArubaOS 10.0.0.0
HPE (Aruba) is again named a Leader in the 2022 Gartner® Magic Quadrant™ for Enterprise Wired and WLAN Infrastructure
For the 17th consecutive time, HPE (Aruba) has been named a Leader in the 2022 Gartner® Magic Quadrant™ for Enterprise Wired and Wireless LAN Infrastructure. Go with a Leader who can help you reduce costs, provide faster mean time to recovery, and improve IT efficiency with a network ready for anything.
Related products
Find information on Aruba products that complement and support the 370 Series APs or another solution better suited to your needs.
570 Series AP
This high-performance Wi-Fi 6 access point is ideal for harsh outdoor weather conditions such as parking lots, stadiums, and public venues.
560 Series AP
This entry-level, Wi-Fi 6 outdoor access point comes with industrial-strength surge protection. Able to endure extreme temperatures, persistent moisture, precipitation, airborne contaminants, dust, salt sprays, and max 165 mph wind speeds, it is ideal for environmentally challenging locations.
360 Series AP
This multifunctional Wi-Fi 5 access point delivers cost-effective, wireless connectivity for mobile and IoT devices in educational, enterprise, retail, and industrial settings.
387 Series AP
This high-performing Wi-Fi 5 access point is a reliable, simple to deploy, point-to-point solution that is built to endure extreme temperature and moisture.
