Aruba 387 Series outdoor 60Ghz/5Ghz point-to-point access point
These high-performing access points are a reliable, simple to deploy, point-to-point solution built to endure extreme temperature and moisture.
High-speed, outdoor, point-to-point
Weatherproof and temperature-hardened, the 387 Series APs deliver gigabit per second aggregate throughput at distances up to 400 meters (or 0.25 miles).
High-speed, outdoor, point-to-point connectivity
With a maximum concurrent on the air data rate of 2.5 Gbps in the 60GHz band and 867 Mbps in the 5GHz band, the 387 Series delivers an aggregate peak data rate of 3.37 Gbps.
Flexible, intelligent radio offering
The 387 Series access points include dual radio supports for 60GHz and 5GHz to provide throughput in good conditions and provide intelligent fallback if the 60GHz radio is impacted by heavy rainfall.
Secure infrastructure
The 387 Series APs help protect user authentication, wireless traffic, and data, with support for WPA and Enhanced Open, WPA-MPSK, and VPN tunnels.
Weatherproof and temperature-hardened
Supporting temperatures from -40°C to +60°C (-40°F to +140°F) and IP66/67 rated, the 387 Series can withstand the harshest environments.
Details and specifications for the Aruba 387 Series APs
Specifications
Wi-Fi Radio Specifications - AP type:
- Temperature-hardened, dual radio, 60GHz 11ad and 5GHz 802.11ac 2x2 MIMO
- 60 GHz 802.11ad 1x1 (2502.5 Mbps max rate) radio
- 1 Spatial Stream for up to 2.5 Gbps
- Internal scanning antenna
- +/- 45° Azimuth Scan
- +/- 17° Vertical Scan
- 5GHz 802.11ac 2x2 MU-MIMO (867 Mbps max rate)
- Two spatial stream MIMO for up to 867 Mbps wireless data
- Internal directional antenna 9 dBi
- Software-configurable dual radio supports 5 GHz (Radio 0) and 60GHz (Radio 1)
- Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz (BLE)
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
- 5.825 to 5.875 GHz
- 57 to 64 GHz
- Available channels: Dependent on configured regulatory domain
- Dynamic frequency selection (DFS) maximizes the use of available 5GHz RF spectrum.
- Supported radio technologies:
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
- 802.11ad: Single carrier (SC)
- Supported modulation types:
- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- 802.11ad: BPSK, QPSK
- Transmit power: Configurable in increments of 0.5 dBm for 5 GHz
- Maximum EIRP (limited by local regulatory requirements):
- 60GHz band: 40 dBm EIRP max
- 5GHz band: 387: 34 dBm EIRP
- Maximum ratio combining (MRC) for improved receiver performance on 5 GHz
- Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
- Short guard interval for 20MHz, 40MHz, 80MHz on 5GHz
- Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
- 802.11ac Transmit beam-forming (TxBF) for increased signal reliability and range
- 802.11ad Beam Steering
- Supported 11a/ac data rates (Mbps):
- 802.11a 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11ac very high throughput (VHT) support: VHT 20/40/80/160
- 802.11ad
- 802.11n/ac packet aggregation: A-MPDU, A-MSDU
Power - Worst-case power consumption: 13.5 W
- Idle power consumption: 4.5W
- Power sources sold separately
- Power over Ethernet (PoE+): 802.3at-compliant
- Power over Ethernet (PoE): 802.3af with some operational restriction:
- Max conducted power per chain for 5GHz drops to 19 dBm
Other Interfaces - One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- Bluetooth Low Energy (BLE) radio
- Up to 4dBm transmit power (class 2) and -91 dBm receive sensitivity
- Visual indicator (multi-color LED): For system and radio status
- Reset button: Factory reset (during device power up)
- Micro USB console interface
- AP type:
Mounting - AP-270-MNT-V1
- AP-270-MNT-V2
- AP-270-MNT-H1*
- AP-270-MNT-H2*
* Recommended bracket solutions for most apps.
Mechanical - Dimensions (excluding mount adapter):
- 18 cm (W) x 18 cm (D) x 10.1 cm (H)
- Weight (excluding mount adapter):
- 1.198 kg
Environmental - Operating:
- Temperature: -40°C to +60°C (-40°F to +140°F)
- Humidity: 5% to 95% non-condensing
- Storage and transportation:
- Temperature: -40°C to +70°C (-40°F to +158°F)
- Operating altitude: 3,000 m
- Water and dust
- IP66/67
- Salt tolerance
- Tested to ASTM B117-07A salt spray 200 hrs
- Wind survival: up to 165 mph
- Shock and vibration ETSI 300-19-2-4
Regulatory Compliance - FCC/ISED
- CE Marked
- RED Directive 2014/53/EU
- EMC Directive 2014/30/EU
- Low Voltage Directive 2014/35/EU
- UL/IEC/EN 60950
- EN 60601-1-1, EN60601-1-2
- For more country-specific regulatory information and approvals, please see your Aruba representative.
Regulatory Model Numbers - AP-387: APEX0387
Certifications - CB Scheme Safety, cTUVus
- UL2043 plenum rating
- Wi-Fi Alliance certified 802.11a/b/g/n/ac
Minimum Operating System Software Versions - ArubaOS 8.4 and Aruba InstantOS 8.4
- ArubaOS 10.0.0.0
Warranty
HPE (Aruba) is again named a Leader in the 2022 Gartner® Magic Quadrant™ for Enterprise Wired and WLAN Infrastructure
For the 17th consecutive time, HPE (Aruba) has been named a Leader in the 2022 Gartner® Magic Quadrant™ for Enterprise Wired and Wireless LAN Infrastructure. Go with a Leader who can help you reduce costs, provide faster mean time to recovery, and improve IT efficiency with a network ready for anything.
